Wood chip boiler
Eco-HK 250-330 kW
The highest output in the Eco-HK series. Can be connected in cascade up to 2 MW.
- rated output
- 249–330 kW
- models
- 3
- fuel
Wood chips

Automatic wood chip heating
Boiler for the large output range, suitable for commercial and industrial applications.
The Eco-HK 250-330 kW is also suitable for apartment buildings, public buildings and district heating networks. The step grate has 3 rotating grates and 1 fixed grate.
Flame temperature monitoring
Step grate system
Automatic detection of fuel quality
Cost reduction with eco mode
In cascade up to 2 MW
Features and equipment
The points below are taken from the Hargassner documentation.
- Step grate system: 3 rotating grates and 1 fixed grate
- Combustion chamber fully lined with refractory material
- Firebed monitoring with contactless sensors
- Lambda sensor with fuel quality detection
- Heat exchanger cleaning system (in first + second pass)
- Energy-saving ignition: 2 x 300 W
- Double Z-shaped rotary valve with 100% burn-back protection
- Exhaust fan (EC motor) with vacuum monitoring
- Flue gas recirculation integrated as standard
- Combustion chamber sensor and tertiary air actuator for combustion control
- Ash discharge for fine ash and grate ash
- No thermal discharge safety device required
- Left/right version (return temperature boost always on the fuel feed side)
- Modern control with touch display
- Mobile control via a smart home app
- 5-year warranty as per the Hargassner warranty certificate
- No output loss during ash removal
- Integrated return temperature boost (optional)
- Fully automatic ash extraction system (optional)
- Cascade controller for up to 6 boilers (2 MW)
Choose the right output.
3 models in the Eco-HK 250-330 kW range. We size the right output from a heat-load calculation; technical advice is free.
Eco-HK 250-330 kWEco-HK 250
249kW
rated output
Adjusts its output between 74.7 and 249 kW according to the heat demand.
- Efficiency (NCV)
- 94.1*%
- Seasonal efficiency
- 82** / 82**%
- Dimensions (W × H × D)
- 1155 × 2015 × 2285mm
- Weight
- 2500kg
- Floor space
- 2.62m²
- Flue pipe
- 250mm
Technical data for every model.
Figures from the Hargassner datasheets for the Eco-HK 250-330 kW range. Pick a column to see that model in detail.
| Model | |||
|---|---|---|---|
| Rated output · kW | 249 | 299 | 330 |
| Fuel heat input · kW | 264.6 | 318.8 | 352.6 |
| Minimum output · kW | 74.7 | 89.7 | 99 |
| Efficiency (NCV) at rated output · % | 94.1* | 93.8* | 93.6* |
| Efficiency (NCV) at 30 % load · % | 96.8 | 96.5 | 96.4 |
| Efficiency (GCV) at rated output · % | 83.3 | 83.3 | 83.4 |
| Efficiency (GCV) at 30 % load · % | 86 | 86.4 | 86.7 |
| Seasonal space heating efficiency (ηs) · % | 82** / 82** | 83** / 83** | 83** / 83** |
| Boiler temperature range · °C | 69 - 95 | 69 - 95 | 69 - 95 |
| Dimensions (W × H × D) · mm | 1155 × 2015 × 2285 | 1155 × 2015 × 2285 | 1155 × 2015 × 2285 |
| Weight · kg | 2500 | 2500 | 2500 |
| Floor space required · m² | 2.62 | 2.62 | 2.62 |
| Flue pipe diameter · mm | 250 | 250 | 250 |
| Ash box volume · l | 75 | 75 | 75 |
| Water content · l | 570 | 570 | 570 |
| Flow / return connection · in | 2.5 | 2.5 | 2.5 |
Values marked * refer to the notes in the Hargassner datasheet.
“–” = value not available for that model.
Swipe for all models
Boiler components.
Cross-section of the Eco-HK 250-330 kW. The numbers in the drawing correspond to the components in the list. The image can be enlarged.
Key components
- 1Step grate system
- 2Firebed level control
- 3Turbulators with automatic boiler cleaning system (also in the first pass)
- 4Ash box 75 l; optional: ash suction system for very long maintenance intervals
- 5Automatic ignition 300 W x2
- 6Two-chamber Z-shaped rotary valve (depth 22 cm)
- 7Recirculation
- 8Heat exchanger
- 9Exhaust fan (EC motor) with negative pressure monitoring
- 10Integrated return temperature protection (optional)
- 11Eco-RA: energy-saving fuel extraction
- 12Ash extraction system for fine ash and grate ash
- 13Negative pressure monitoring
- 14Combustion chamber fully lined with refractory material
- 15Flame concentration nozzles made of high quality refractory material
- 16Lambda sensor
- 17Flame temperature monitor
- 18Grate temperature monitoring
- 19Stainless steel auger and feed pipe
Eco-HK 250-330 kW 3D model
The model can be rotated and enlarged to show the construction details. It is useful when planning the plant room.
The viewer loads from the external provider rooom.
Recommended accessories
For fuel feeding, controls, storage and hot water, all compatible with Eco-HK 250-330 kW.
Fuel extraction systemDirect auger extraction systemDirect auger fuel extraction for wood chips, suitable for Eco-HK 70–330 kW boilers.Details
Fuel extraction systemECO fuel extraction systemSave heating costs with the ECO fuel extraction system.Details
Fuel extraction systemIndustrial fuel extraction systemFuel extraction for industrial applications.Details
Filling systemsDriveable bunker filling lidFor flexible placement of the filling system.Details
Filling systemsInside ejectorMake maximum use of the volume of the storage room.Details
Filling systemsOutside ejectorFor filling through windows or wall openings.Details
Filling systemsHorizontal distribution augerFor filling hard-to-reach storage spaces.Details
Filling systemsFilling system with variable inclinationOptimum use of the storage room or the boiler room.Details
Projects built with this boiler
Installed and commissioned by the Perfect Energy team.
All wood chip ranges
Request a quote for Eco-HK 250-330 kW.
Send us the building data: its use, the floor area and the available fuel. An engineer recommends the model; the final quote is issued after the technical assessment.
- Free technical consultation
- Authorised Hargassner dealer
- Delivery and installation across Romania









