Skip to content

Hargassner Eco-HK and Magno

Wood chip boilers

Boilers with automatic feeding from a bunker, designed for large heat consumers: farms, guesthouses, hotels, industry and district heating networks.

single boiler
20 kW – 2.5 MW
in cascade
10 MW
models in 7 ranges
40

In an emergency it can also be fed with pellets.

Hargassner Eco-HK wood chip boiler

Output range

20 kW –⁠ 2.5 MW

in cascade up to 10 MW

Wood chips held in two hands
Wood chips

Choose the range by the required output.

7 Hargassner ranges from 20 kW to 2.5 MW, plus cascade systems up to 10 MW. Each range has its own page with the models, technical data and compatible accessories.

Free system sizing

An engineer calculates the required output from the floor area, insulation and hot-water demand, and recommends the suitable range.

Recommended ranges by building type.

The choice of range depends on the type of building and its heat demand. The exact model and output are set after the technical assessment.

How a Hargassner wood chip boiler works.

The boiler draws the wood chips from the store automatically. Efficiency remains constant when the chips are dry and stored correctly.

Cross-section of the Hargassner Eco-HK 70 –⁠ 120 kW with its key components numbered
Cross-section, Eco-HK 70 –⁠ 120 kWKey on the range page

Step grate

The step grate is installed in a refractory-lined combustion chamber. Contact-free sensors monitor the fuel bed.

Reads the fuel

The lambda sensor measures the oxygen in the flue gas, detects the quality of the chips and adjusts combustion. The Magno range accepts chips with up to 60% moisture (M60/W60).

Burn-back protection

The double Z-shaped rotary valve gives 100% protection against burn-back.

Automatic cleaning

The heat exchanger cleans itself in the first and second pass; fully automatic ash removal is available as an option.

Touch and app control

Touch display on the boiler and remote control through the smart home app.

Cascades up to 10 MW

Up to 6 Eco-HK boilers in cascade (2 MW) or industrial Magno systems of up to 10 MW, with central control.

  • Energy class up to A++
  • 5-year warranty as per the Hargassner warranty certificate
  • Can also run on pellets in an emergency

Frequently asked questions about wood chip boilers

Yes, wood chip boilers are often used for high demand and continuous operation.

Fuel quality directly affects efficiency and reliability. For this reason, the quote includes operating recommendations.

Yes. For higher outputs, several boilers are connected in cascade. While one boiler is being serviced, the others remain in operation. Our largest project: 2 × Eco-HK 330 kW at Hotel Ivașcu, Moisei.

Usually a room next to the plant room, sized to your consumption. During the free technical visit we measure and propose the right bunker and feeding setup for your building.

It depends on the configuration and the season. The binding quote states the exact timeline. More installation dates are available in summer, while autumn dates fill up quickly. We therefore recommend starting the project before the heating season.

Wood chips are usually the cheaper fuel and suit larger outputs or users with access to wood. Pellets need less space and are easier to handle, which makes them suitable for houses and buildings with limited space. We recommend the right option after assessing the building and the available fuel.

Three facts about the building are enough for a first quote.

The heated floor area, how well it is insulated and which fuel you have to hand. The final quote follows the technical assessment.

or message us on WhatsApp
  • Free technical consultation
  • Authorised Hargassner dealer
  • Delivery and installation across Romania