Skip to content

Wood chip filling systems

Inside ejector

Maximum use of storage room volume

Filling systemsWood chips
Inside ejector

Vertical filling system, with ejector inside

The storage room is filled by an inside ejector. This system can be used for storage rooms on upper floors and for rooms without suitable direct access. The storage room capacity is used optimally and very little dust is spread. Depending on the nature of the wood chips, the throw range is between 4 and 5 m and the conveying capacity up to 50 m³/h.

Flow path and operating principle

  • Vertical auger inside the storage room
  • Adjustable ejector with throw range of 4 to 5 m
  • Conveyor capacity up to 50 m³/h
  • Two fill level indicators in the storage room
  • Very low dust distribution during filling
  • Optimal use of storage room volume

Conventional filling

Without a dedicated system, a wood chip store is usually filled using one of the methods below.

Conventional filling with a tipper

  • Wood chips are not distributed optimally in the storage room
  • Risk of uncontrolled accumulation and manual correction

Conventional front loader filling

  • Front loader filling usually requires sufficient access around the storage room
  • Material distribution often remains uneven

Conventional blowing system filling

  • Standard blowing systems can generate higher dust loads
  • Useful volume can remain partially unused

Advantages of vertical filling with inside ejector

Hargassner components for the whole system

  • Vertical auger with electric motor
  • Adjustable ejector with electric motor
  • Steel frame with anti-vibration mounting and support feet
  • Two fill level indicators and maintenance switch

Clean and controlled material flow

  • Very little dust distribution in the storage room
  • Stable filling process with repeatable results
  • Suitable for applications with higher cleanliness requirements

Flexible installation scenarios

  • Suitable for storage rooms on upper floors
  • Works in rooms without suitable direct access
  • Designed to maximise usable storage volume

Practical filling process

  1. Truck unloading into receiving trough

    • Vertical system receives wood chips from truck unloading
    • Material is fed continuously toward the ejector
  2. Ejection and distribution in storage room

    • Ejector spreads wood chips over a large area
    • Even distribution reduces manual intervention
  3. Level monitoring and operating safety

    • Fill level indicators protect against overfilling
    • Maintenance switch supports safe servicing

Performance data for inside ejector system

Key technical and operational values for project planning

Conveyor capacity
up to 50m³/h
Throw range
4 - 5m
Dust distribution
very low
Storage room utilisation
optimised
Fill level monitoring
2pcs
Application area
upper floors and rooms without direct access

Throw range and conveying capacity depend on wood chip quality, geometry and moisture.

Compatible Hargassner systems

The accessory is part of the configuration of these product families. The right version for your model and installation is confirmed in the quote.

Three facts about the building are enough for a first quote.

The heated floor area, how well it is insulated and which fuel you have to hand. The final quote follows the technical assessment.

or message us on WhatsApp
  • Free technical consultation
  • Authorised Hargassner dealer
  • Delivery and installation across Romania